Description

Elevate your drum lampshade making with our striking Matt Black Lampshade Ringset, which is ideal for creating both modern and retro style ‘rigid’ lampshades, when used with our Stick-It® Lampshade Making PVC and your choice of fabric.

For professional and DIY makers, our Black Matt Lampshade Ringset is extremely high quality and expertly sprayed in a low sheen matt black paint, with a beautifully smooth finish. Suitable for use with both UK and European Lampholders or Pendant Fittings, by purchasing our converting washers, this lampshade ringset can also be used for US harp & finial fittings.

This set now includes a black plastic reducer/converter ring for a more uniform colour scheme.

Features

Ringset is 20cm in diameter
Used to make handmade ‘hard’ or ‘rigid’ drum lampshades
Epoxy coated Matt Black paint with a low sheen and smooth finish
Rings may have a tiny uncoated spot where the ring has been hooked for spraying
Frames manufactured from 3.25mm gauge mild steel Wire
Black plastic Euro to UK reducer ring included.

What’s included?

1 x 20cm diameter Matt Black Lampshade Ring
1 x 20cm diameter Matt Black Utility Frame, with an aperture of 40mm (EU fitting)
1 x E27/E26 to B22/E14 black plastic Lampshade Converter/Reducer Adaptor

What else do I need to make a drum lampshade?

Self-adhesive Lampshade Making Panel pre-cut to size, corresponding with your diameter of ringset, available in 4 heights (150, 200, 250 and 300mm) or purchase a roll of Stick-It® Self-Adhesive Lampshade Making PVC and cut your own panel to size.
9mm Tessa Double-sided tape, to apply to the rings and seam
Rolled edge tool, for finishing the lampshade edges
Fabric of your choice measuring 645mm wide x 220mm high

What type of lamp holders will fit this lampshade?

The frame is manufactured to fit European lamp holders and a Converter/Reducer Adaptor plug is supplied to reduce the aperture to fit UK lamp holders.

B22 Bayonet Cap Lampholders (UK) – Adaptor Fitted
E14 Edison Screw Lampholders (EU) – Adaptor Fitted
E27 Edison Screw Lampholders (EU) – Adaptor Removed
E26 Edison Screw Lampholders (US) – Adaptor Removed

Harp & Finial Fittings
Mainly used in the USA, all our lampshade making kits can be converted to Harp & Finial fittings by purchasing our Harp and Finial convertor / adaptor system.

Additional products

Being neutral, our Matt Black Lampshade Ringset complements many of our Stick-It ® linings and look striking with our Silver, Gold and Copper Stick-It® Lampshade range. in our Metallics and our Neon Stick-It® range.

FREE Lampshade Designer Software
Try our FREE Lampshade Designer Software to design your own template for your Matt Black Lampshade Ringset, featuring an instant on-screen template preview and options to save and print your template at home or alternatively send this directly to our professional Template Cutting Service.